No minimum order!! No tax id required! Fast Shipping! Orders shipped same or next day!

Questions
Call Us: 800-819-6118
Store Hours: Mon to Fri 9:00 am to 5:00 pm EST Saturday 9:00 to 1:00
Candle Making > Candle Carving > Carving Equipment > 

Carving Equipment

BASE
MADE IN THE USA - This base fits all 3 sizes of our carving rack tops (6, 9, and 12) which are sold separately. The bottom of the base is equipped with 4 anti-slip rubber pads to minimize the movement of the base while you are carving. Since the carving rack tops are interchangeable you will only need 1 base per carving station.

SHIPPED FROM CANDLEFUN
Price: $21.00

Qty:

Add To Cart

BCUT
MADE IN THE USA - The bottom cutting knife is used to help cut a level bottom on the candle. The pin on the bottom of the tool gets placed into a hole in the bottom of the carving rack. The blade on the tool gets pushed to the center of the of the candle and the candle gets rotated until the entire bottom removed evenly as a level cut.

SHIPPED FROM CANDLEFUN
Price: $28.00

Qty:

Add To Cart

DR-6
MADE IN THE USA - The drying rack is made of 1/2 inch plastic piping, and six hooks can hold candles up to 12 tall. The rack is shipped unassembled and is very easy to assemble without tools.

This item is shipped directly from Candlefun - please allow 7-10 days for delivery.
Price: $25.00

Qty:

Add To Cart

DR-G
MADE IN THE USA - The dripping rack is made of 1/2 inch plastic piping, and a hook holds a candle over the 5 gallon glaze bucket, allowing glaze to drip back into the bucket. The rack also has a screw to hold a glaze stirring stick. The rack is shipped unassembled and is very easy to assemble without tools. THIS ITEM WILL BE DROP SHIPPED DIRECTLY FROM THE MANUFACTURER.
Price: $25.00

Qty:

Add To Cart

TUBE-S
MADE IN THE USA - Sold in sets of 10 with the wickholders and wicks. The tubes are made of a special molded plastic designed to hold the candle handle in place while carving. The wickholders are made of a glass piece that holds the wick and blocks the heat of the flame from reaching the plastic. The fiberglass wick is a lifetime wick and it does not have to be replaced. THIS ITEM WILL BE DROP SHIPPED DIRECTLY FROM THE MANUFACTURER.
Price: $16.00

Qty:

Add To Cart

HANDLE
MADE IN THE USA - The candle handle holds the candle while it is being dipped, carved, glazed, and dried. The handle is fastened into the candle by an expansion plug which is expanded by the turning of a wingnut at the top of the handle.

Price: $34.99

Qty:

 (Out of Stock)

Add To Cart

LADLE
The dipping/pouring can is used to dip wax from a wax well, and then to pour the wax into a mold. The can will fit inside the 7 diameter of the wax well and in one dip will hold enough wax to fill 2 nine-inch molds. You can also use the can to fill a larger pouring can right at the wax melter.
Price: $23.32

Qty:

Add To Cart

RACK-L
MADE IN THE USA - The carving rack top is made for 12 inch candles. The tops work together with a rack base, sold separately. All rack tops fit the same rack base. The bottom crosspiece has a hole for the pin of the bottom cutting knife. The left side piece of the rack has two hole with fasteners which are used to hold the marking strips. The fasteners are easily removable for changing marking strips. The fasteners are long enough so that several marking strips can be stored on the rack top at the same time.

THIS ITEM IS DROP SHIPPED FROM CANDLEFUN
Price: $46.65

Qty:

Add To Cart

MARK
MADE IN THE USA - The marking tool is used to place small indents on the soft candle. By lining up the tool with marks on the marking strip, and then pressing the stiff wire into the soft candle, you can mark the candle so that you can see where certain cuts have to begin. This tool is especially helpful for beginners, and for candle carvers who want to carve accurate designs.

SHIPPED FROM CANDLEFUN
Price: $42.00

Qty:

Add To Cart

RACK-M
MADE IN THE USA - The carving rack top is made for 9 inch candles. The tops work together with a rack base, sold separately. All rack tops fit the same rack base. The bottom crosspiece has a hole for the pin of the bottom cutting knife. The left side piece of the rack has two hole with fasteners which are used to hold the marking strips. The fasteners are easily removable for changing marking strips. The fasteners are long enough so that several marking strips can be stored on the rack top at the same time.

THIS ITEM IS SHIPPED DIRECTLY FROM THE MANUFACTURER - PLEASE ALLOW 5-7 DAYS FOR DELIVERY
Price: $56.00

Qty:

Add To Cart

MCK-TOOL
MADE IN THE USA - The assembly tool holds the mold peg securely while it is being fastened to the bottom of a mold. There is a screw which protrudes into the tool. When the mold peg is placed into the end of the tool, the screw fits into the notch at the end of the mold peg, to keep the mold peg from turning while it is being fastened into the bottom of the mold.
THIS ITEM WILL BE DROP SHIPPED DIRECTLY FROM CANDLEFUN
Price: $11.66

Qty:

 (Out of Stock)

Add To Cart

RACK-S
MADE IN THE USA - The carving rack top is made for 6 inch candles. The tops work together with a rack base, sold separately. All rack tops fit the same rack base. The bottom crosspiece has a hole for the pin of the bottom cutting knife. The left side piece of the rack has two hole with fasteners which are used to hold the marking strips. The fasteners are easily removable for changing marking strips. The fasteners are long enough so that several marking strips can be stored on the rack top at the same time.

SHIPPED FROM CANDLEFUN
Price: $46.65

Qty:

Add To Cart

STIR
The stirring stick has a flathead nylon screw, which fits through a hole at the top of the dipping well to hold the stick against the inside of the well, and out of the way of the dipper. The stirring stick also has two holes or notches, to show suggested lowest and highest wax levels in the dipping well. Measure the levels without a candle in the well wax, while holding the stick flat against the inside of the well, with the bottom of the stick touching the bottom of the well.

Price: $5.83

Qty:

Add To Cart

WELL-7
MADE IN THE USA - The dipping well is made of stainless steel. It is 7” in diameter and 17.5” tall. The two holes at the top of the well are for a removable well handle and for holding the stirring sticks next to the well wall while you are dipping in the well. - THIS ITEM WILL BE DROP SHIPPED DIRECTLY FROM THE MANUFACTURER.
Price: $120.00

Qty:

Add To Cart

MCK-S
MADE IN THE USA - The mold conversion kit contains a mold peg, a washer, and a lag bolt. The mold peg is fastened inside a mold to hold the oil tubes. The conversion kits are for use by candle carvers who already own molds but want to start making the cut and carve candles. Molds have to be at least 1.75 at the bottom of the mold (top of candle) for the conversion kit to work properly.
Price: $7.00

Qty:

Add To Cart

CFM-96
MADE IN THE USA - Candles made with this mold fit the medium carving rack. YOU ONLY RECEIVE ONE MOLD.
Price: $29.16

Qty:

Add To Cart